New ReQuest Panels

[Davioj]

New panels ordered 6 to 8 weeks to be produced, anyone who has changed the reQuest panels about how long do they take to install. Very excited to get the new ones should go real well with the rest of my ML home media room. Anyone have trouble with power supplies or do you just wait for one to go before ordering ML said if the power supply is good then don't worry so i've asked them if they think that part will become obsolete, any opinions on that, because you can't get new caps any more.
Dave

 

[Russr]

BTW - how much were the new reQuest panels?

 

[Davioj]

$2250.00 USD ML will manufacture a set 6-8 weeks lead time.

Dave

 

[Robert D]

I got some new panels for my Prodigy speakers a couple of years ago and they sound great. It was a huge improvement and the best $2800 I ever spent. I would not worry about upgrading any internal parts unless something breaks down. My speakers have been very reliable.

 

[Davioj]

Yes these are 27 years old going to set them up to bi-wire them today and see if that improves them, even though they still sound good without the new panels I notice a loss when you add a little volume to them, thanks for the upgrade info, that's what ML said so I wanted to know if the power supplies would be going obsolete they are going to get me an answer because if so it would not be a bad idea to buy a spare.

Dave

 

[audioxcel]

New panels ordered 6 to 8 weeks to be produced, anyone who has changed the reQuest panels about how long do they take to install. Very excited to get the new ones should go real well with the rest of my ML home media room. Anyone have trouble with power supplies or do you just wait for one to go before ordering ML said if the power supply is good then don't worry so i've asked them if they think that part will become obsolete, any opinions on that, because you can't get new caps any more.
Dave

About an hour to swap the panels with a helper. It won't take as long to replace the panels as it will to get the speaker placement spot on.

 

[Davioj]

Ya I know about speaker placement I had Ethoes for the fronts, now in rear, centre c esl and ceiling are motion series now reQuests for front, even though I think they need panel replacement still sound incredable for 27 year old panels, can't wait for new ones.

Dave

 

[Brandon Hartwick]

It probably takes longer to get the speakers in a place to work on than it takes to swap out the panels.

Did you get clear spars or micro perforated stators? I was bugging Ron in tech service and they agreed they'd make me Aerius I panels with clear spars but no micro perf. Can't have it all I guess.

 

[Davioj]

No they are the perforated ones to match the rest of the system, also didn't know about clear spars might look into it now though.

Dave

 

[Davioj]

Did you get clear spars or micro perforated stators? I was bugging Ron in tech service and they agreed they'd make me Aerius I panels with clear spars but no micro perf. Can't have it all I guess.

Where do you find clear spars and are they more expensive

 

[Brandon Hartwick]

Where do you find clear spars and are they more expensive

Talk to martin logan, they should be able to sort you out.

 

[wink]

Takes about 20 min to replace each one Replace the Velcro strips and install stat stops…

Dan

 

[Davioj]

Thanks there wink can't wait for them to make them, just talked to them today wondering if they made the speakers in Kansas or if they were made up here in Canada, new stuff is mfg. in Canada but they make the panels for the older stuff down there thought it would be good if they were made up here, the plant is only about 20 miles from me I could save on the shipping. Just finished bi-amping the reQuests an hour or so ago, they sound alot better bi-amped can't wait for the panels.

Dave

 

[Russr]

Thanks there wink can't wait for them to make them, just talked to them today wondering if they made the speakers in Kansas or if they were made up here in Canada, new stuff is mfg. in Canada but they make the panels for the older stuff down there thought it would be good if they were made up here, the plant is only about 20 miles from me I could save on the shipping. Just finished bi-amping the reQuests an hour or so ago, they sound alot better bi-amped can't wait for the panels.

Dave

Dave - is there a thread where you've described/taken pics of your bi-amp project?

 

[Davioj]

Never thought about taking pics but here is what I did, out of receiver Anthem 1120 used a y adapter in the preamp section of front left and front right, ran them to the Anthem 50 amp, 2 amps left and left surround, same for the right side, last amp is still used for the centre . Then just used the surround amps in my receiver to run the surround speakers and left the atmos amps the same 4 height speakers, I use the back amps for zone 2, reQuests really changed doing this, they sound really good for 26 year old panels.

Dave

 

[Davioj]

Takes about 20 min to replace each one Replace the Velcro strips and install stat stops…

Dan

Hey Dan is there any special velcro to use or just go to a fabric store and buy some self adhesive valcro.

Dave

 

[Davioj]

Dave - is there a thread where you've described/taken pics of your bi-amp project?

After your post I didn't take pics but described how I did it