Nik
Well-known member
I am in the final stages of setting up my home theater in my living room but have a tough decision. All electronic audio/video components are running on a standard 15amp line through a power conditioner. I am wanting to install two 20amp lines (no not 220) because I will be running four Emotiva amps- 2x XPA3 & 2x XPA1. The XPA1 is a 1000watt monoblock at 4ohm and the XPA3s will be running at 400watt x2 at 4ohm and 500watt x1 at 4ohm. Until the XPA1 is released I will be running the 2 XPA3s. I have Aerius i fronts, Logos center, and Helos 100 rear- the Aerius will be replaced with Sequel 2 after I replace the panels.
So here's the question: I only have two blanks in the breaker box...
-should I run two 20amp lines with hospital grade plugs and condense existing breakers to open up spots
-one 20amp line with hospital grade four plug outlet
-one 30amp line with hospital grade four plug outlet
What other options do I have?
Thanks all!
Nik
So here's the question: I only have two blanks in the breaker box...
-should I run two 20amp lines with hospital grade plugs and condense existing breakers to open up spots
-one 20amp line with hospital grade four plug outlet
-one 30amp line with hospital grade four plug outlet
What other options do I have?
Thanks all!
Nik
Last edited: