Search results

MartinLogan Audio Owners Forum

Help Support MartinLogan Audio Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Washing panels without taking them off speakers

    But yeah, I agree that having them recapped is always a good idea. I’ve done my amps, crossover for the vistas. Now it’s power supply’s turn.
  2. J

    Washing panels without taking them off speakers

    In my case it is actually the panel most likely. I’ve switched the panel from the problematic speaker to the good one. And the problem seems follow the panel. Right now the humidity is constantly lower than 55% so the problem is not present. I’ll post an update when summer comes.
  3. J

    Washing panels without taking them off speakers

    How can power supply be affected by humidity tho? I found 55% of RH is the threshold for the noise to appear. If I blow on the panel lightly, the noise level will dramatically increase due to the increase of moisture level.
  4. J

    Washing panels without taking them off speakers

    Yes, even with speaker cables off. It is still there.
  5. J

    Washing panels without taking them off speakers

    It’s nothing to do with my amp. With everything off except for the speaker with the music sense indicator on, the hissing is still there.
  6. J

    Washing panels without taking them off speakers

    I should have been more specific with the result of washing only the front side of the panel. So I’d say 95 percent of the noise is gone. I can only hear the hissing with my ear “on” the panel, which I don’t consider it as a problem anymore.
  7. J

    Washing panels without taking them off speakers

    My vistas have been hissing for the whole summer when humidity is higher than 60 percent. Vacuuming doesn't help with this problem. So I thought the panels have got dirty again due to my non-ideal environment. Since last time I washed them in the shower and it was quite a bit of effort, I...
  8. J

    Vista sparking

    You can’t take them off. If you did then the panel is done. What you should do is to take the whole panel i.e. the front and back stator and the Mylar film together as a single piece into the shower. Clean it using a soft brush with Simple Green as best as you can. Rinse it as best as you can...
  9. J

    Vista sparking

    You can take it off for a shower, there are six screws in total you need to remove. 4 at the bottom and 2 behind the panel. Once you've got the frame off. You'll need to remove the tensioner nuts at the bottom and some screws on the frame itself. After that you slide the top struct off and pull...
  10. J

    Capacitor value xover Summit

    Just wondering if it had improved the sound?
  11. J

    ML Vista Crossover Bypass

    The caps are really cheap ones tho.
Back
Top