legarem

10 years ago, I also had horns. An Onken with Altec 1005B and a JBL2405. All was triamplified with single ended triodes. I loved the...

Today was the day to try the setup. After fiddling with the placement, I finally placed them in the room with the calculations ML...

Here are picts of the CLS I have to place in my listening room. They have to dethrone my 3A Reference 2002 which were the best...

Yes, I got them last week I repaired the frame of one speaker which had an open wood joint and I installed them in the wood frame I had...

One of the biggest problem with these amps is bad contacts with output tube sockets. If you ever buy 6P45S, carefully clean the pins...

Output tubes for the Melos are still easy to find if you buy Russian 6P45S military tubes. There are Ukrenian sellers on eBay. I can...

After many hours (or days) working on these beasts, they never broke. I bought a 6P45S batch to be sure I could be safe for years...

Hello Woof Let me tell you. Using these Melos was sometimes a nightmare. First. I had to draw the schematics because nobody has them in...

I will get my CLSII Monday. I will finally use a Classe DR15 amp. Presently, I have a Goldmund Job225 which is not supposed to do the...

Thanks a lot

Here are the two panels serial numbers. Do someone can give me if they are original or they were changed By the way, I made an error. I...

As for the amp, I would use a venerable Classe DR3 VHC which has only have 45 W/C at 8 ohm, 90W/C at 4 ohm and 360W/C at 1 ohm. I...

As I already have a ML Depth I I'm more tempted to get the CLS. I suppose this sub could match the CLS as it is made by ML.

Hello Brad The price asked is $1800 CDN ($ 1440 USD) I have top notch equipment but presently, I have 4 ohms speakers with a...

Hello I always dreamed to buy a pair of CLS Many peoples advised me that ML panels have a definite life span. I didn't listened theim as...