music again
Well-known member
- Joined
- Jul 31, 2007
- Messages
- 209
- Reaction score
- 0
Rich,
This one's definitely for you since I know you are, or will be using these on your Summits and Sanders mono blocks, as well as your CD player. Input is welcome from anyone else using these cables as well!
Questions:
With all of the cables out there, and the obvious quality of your entire system, why did you end up chosing the "within reach of the average audiophile budget", SignalCable stuff?
Specifically for the Summits . . .
Would you recommend the "Magic Power Cord", 20 amp version, or 15 amp version? I do have two dedicated outlets using the PS Audio Power Port outlets, which I believe are rated at 20 amps. I just don't know if the Summits will accept, or even need 20 amp connector option.
The specifications on the SignalCable website state: " 20A female conector is ONLY applicable to components (normally high powered amplifiers) that REQUIRES a 20A IEC, 20A male connector requires a 20A wall connector.
The Summits have 2 200 watt ICE amps each, so . . . which should we use?
Specifically for the Sanders amps, 2 channel or mono blocks . . .
Basically the same questions as above. 15A or 20 amp version for Sanders amp?
Right now I'm using Kimber Kable Hero IC's, which are copper. I noticed that SignalCable's IC's and speaker cable are silver based. I'm using an Oppo right now for a CD player and I'm wondering if the silver based cable may not be the right choice at this time. This should open up a debate . . . copper versus silver!
I'll wait to hear everyone's feedback before placing an oder!
Joe M.
This one's definitely for you since I know you are, or will be using these on your Summits and Sanders mono blocks, as well as your CD player. Input is welcome from anyone else using these cables as well!
Questions:
With all of the cables out there, and the obvious quality of your entire system, why did you end up chosing the "within reach of the average audiophile budget", SignalCable stuff?
Specifically for the Summits . . .
Would you recommend the "Magic Power Cord", 20 amp version, or 15 amp version? I do have two dedicated outlets using the PS Audio Power Port outlets, which I believe are rated at 20 amps. I just don't know if the Summits will accept, or even need 20 amp connector option.
The specifications on the SignalCable website state: " 20A female conector is ONLY applicable to components (normally high powered amplifiers) that REQUIRES a 20A IEC, 20A male connector requires a 20A wall connector.
The Summits have 2 200 watt ICE amps each, so . . . which should we use?
Specifically for the Sanders amps, 2 channel or mono blocks . . .
Basically the same questions as above. 15A or 20 amp version for Sanders amp?
Right now I'm using Kimber Kable Hero IC's, which are copper. I noticed that SignalCable's IC's and speaker cable are silver based. I'm using an Oppo right now for a CD player and I'm wondering if the silver based cable may not be the right choice at this time. This should open up a debate . . . copper versus silver!
I'll wait to hear everyone's feedback before placing an oder!
Joe M.