Recent content by KCWolfPck

With specific regard to my system's ability to output Dolby TrueHD and Dolby Digital Plus: The AVM-50 has 4 HDMI inputs that accept up to 5.1 multi-channel PCM The Sony BDP-S1 is currently running firmware Ver. 3.6. Many months ago (I believe Ver. 2.0) a firmware update enabled the Blu-ray...

Ok....transformation from 61" DLP to projection system is complete. Changes since last update: - Placed components in new component stand (BDI Avion 8529) - Placed sub in corner and moved mains even closer together - Added some LED backlighting for night-time music listening Updated photos...

Good and free photo software: http://www.irfanview.com/

Yes, there are 3 settings: 1) Choose any of the 7 colors 2) Rotate between all 7 colors (no fade) 3) Gradually fade though all of the colors Number 3 is my favorite while listening to music.

I got one more to backlight the center speaker (also new TV stand):

This picture shows that all of the wiring is stored underneath the speaker. The only thing that sticks out is the on/off button: This picture show how I have the wires running up the sides of the front of the speaker. Of course, this is usually covered by the speaker grill: This picture...

The wires are totally hidden. The power cord goes from the wall to underneath the spike raised speaker. All of the wiring is also stashed beneath the speaker with the exception of the button to turn it on/off (which can be slid under the speaker when not in use). The wiring to the LED...

FatJ, Yes, that is the correct product. They come with everything you need. I used a whole set of 4 on each speaker. 2 up each rail. I used the double sided adhesive that came with it. All the wiring fits neatly underneath the speaker if your spikes aren't too low. The wires are run...

Yeah, I already did that. I ran a forum search...but I must not have used the right search terms. I know I've seen some before....but it was long ago.

I've been searching the forums trying to find others that have done something similar. I recently bought some dioder LED lighting strips from Ikea to backlight the Ascents. Here are 3 photos: Before Blue LED backlighting Red LED backlighting It looks like I'll need one more set for...

Update: I've now made the following changes to my system: 1) Replaced Cinema with Stage 2) Replaced 61" DLP with a Panasonic PT-AE2000U 1080p projector coupled with a Carada Criterion 100" 16:9 BW screen (1.4 gain) 3) Moved main speakers closer together 4) Painted wall

Ok, I finally got everything set up. Here are new pics with the Carada Criterion 100" 16:9 BW screen and Panasonic PT-AE2000U 1080p projector.

I honestly haven't had a chance to listen yet. My projector doesn't get delivered until today, so I've still had my TV in the room sitting on the floor in front of the left speaker.

Kach, That 13" was from the wall to the side of the panel closest to the wall. Now that I've moved the speakers closer to the middle of the room...that distance is now 19".

I second the E4s.....great earphones! I love them.