slowGEEZR
Well-known member
Cool looking clutch cover! Hope it doesn't scratch easily.
Wanted to share another of my passions - Project SV650 "Cafe Fighter"
- Thread starter c_morse
- Start date
Help Support MartinLogan Audio Owners Forum:
c_morse
Well-known member
Alright guys,
As of tonight, the project is COMPLETE!
Received my Motrax tank pad, SV Racing Parts rear sets, K&N oil filter, and a few other random bits in the mail recently, and finally had a chance to get them all on tonight.
Special thanks goes out to Blair at SV Racing Parts for taking care of me throughout this process. A lot of his parts made it on to this bike, and I'm thoroughly impressed with his customer service, part quality, etc, etc, etc. Really can't say enough good about the guy!
Anyway, pics!
Shot of the bike running.
Rear side shot. I think the bike looks absolutely sinister from this angle.
Up close shot of the right side. Of note are the 636 rear shock, Galfer SS brake line, SV Racing Parts rear set, Delkevic mini exhaust, clear clutch cover, and also the CNC fluid reservoir.
On top of the tank. Of note are the Motrax tank pad, Acewell gauge (fully functional), and billet gas cap.
Up close shot of the gauge. Tested fully functional and working exactly as advertised.
As of tonight, the project is COMPLETE!
Received my Motrax tank pad, SV Racing Parts rear sets, K&N oil filter, and a few other random bits in the mail recently, and finally had a chance to get them all on tonight.
Special thanks goes out to Blair at SV Racing Parts for taking care of me throughout this process. A lot of his parts made it on to this bike, and I'm thoroughly impressed with his customer service, part quality, etc, etc, etc. Really can't say enough good about the guy!
Anyway, pics!
Shot of the bike running.
Rear side shot. I think the bike looks absolutely sinister from this angle.
Up close shot of the right side. Of note are the 636 rear shock, Galfer SS brake line, SV Racing Parts rear set, Delkevic mini exhaust, clear clutch cover, and also the CNC fluid reservoir.
On top of the tank. Of note are the Motrax tank pad, Acewell gauge (fully functional), and billet gas cap.
Up close shot of the gauge. Tested fully functional and working exactly as advertised.
c_morse
Well-known member
Front shot showing off the HID headlight. Also of note are the SV Racing Parts caliper adapters and upgraded front brakes.
Left side shot, down low.
Shot of the SV Racing Parts left hand side rear set. Nice piece!
And from up and over in the back.
c_morse
Well-known member
Finally a couple of pics of the SV along with my Daytona 675...
And... a video of the completed project.
http://www.youtube.com/watch?v=H7EuMZrkWCM
And... a video of the completed project.
http://www.youtube.com/watch?v=H7EuMZrkWCM
c_morse
Well-known member
Final Mods List:
LIGHTING
-DDM Tuning 6000K Hi/Lo Motorcycle HID Kit
-Clear Alternatives Smoked Integrated Taillight
-ELFR-1 Flasher Relay
-Superbright LED Front Turn Signals
-Aztec8 41mm Headlight Mounts
-Replacement Headlight Housing
-Fully integrated HID wiring into the main Harness
BODY
-Targa Solo Seat Cowl
-Stripped/Painted Tins Matte Black
-Powdercoated Triple Clamps Gloss Black
-Powdercoated Headlight Trim Ring Gloss Black
-Powdercoated Frame Aussie’s Flat Anodized Red
-Powdercoated Wheels Aussie’s Flat Anodized Red
-Powdercoated Inner Brake Rotors Aussie’s Flat Anodized Red
-Powdercoated Rear Swingarm Matte Black
-Powdercoated Various Brackets Matte Black
-Powdercoated Lower Forks Matte Black
-Modified/Powdercoated Rear Subframe Matte Black
-Painted Rear Brake Caliper Matte Black
-Motrax Tank Pad
-SV Racing Parts Black Anodized Exhaust Hanger
-Billet Keyless Gas Cap
-99-02 Full Lock Set
-99-02 Black Chain Guard
-Corbin Seat
-OEM Frame Covers
-mrk66 (SVRider) Quick Release Tank Pin Set
-mrk66 (SVRider) Quick Release Panel/Tank Kit
-Nille (SVRider) Black Clutch Cover
-CNC Aluminum Swingarm Spools
SUSPENSION
-Kawasaki ZX6R 03-04 Rear Shock
-Racetech .95 wt Spring/Gold Valve Emulator Kit
-Motul Expert 15W Fork Oil 1 Quart
-SV Racing Parts Captive Front Wheel Spacer/Speedo Delete Kit
-Replacement Rear Wheel Bearings
-SV650S Upper Triple Clamp
-SV Racing Parts Front Nissin Brake Adapter Brackets/Hardware
-Gold 954 Nissin Front Brake Calipers/Galfer Brake Pads
CONTROLS
-Billet Gold Shorty Adjustable Levers
-SV Racing Parts Rear Sets
-Vandriver Rear Integrated Billet Brake Fluid Reservoir
-Yamaha R6 Throttle Tube (5SL-26240-01-00)
-Vortex 41mm 7* Clip-on Handlebars
-Driven D3 Gold Aluminum Grips
-SV650S SS Front Brake Lines
-Galfer SS Rear Brake Line
ELECTRICAL
-MDA123 8 Cell Li-Ion Battery
-Acewell 2853 Digital Gauge
-In-Line Brake Pressure Switch
-FH016 MOSFET Regulator/Rectifier
-D’Ecosse (SVRider) R/R Wiring
-Modified Stock Wiring Harness w/ New Fuel Circuit, Deleted all Unused Wires, Added New Connectors For Rear Brake Light & All Turn Signals, etc
ENGINE/PERFORMANCE
-K&N Desnorkeled Air Filter
-Delkevic Mini - 8” C/F Round Muffler
-OEM Radiator Cap
-K&N Oil Filter
-Heat Wrapped/Sealed Exhaust
-Painted Engine Matte Black
-SV Racing Parts 520 Chain Kit (47T Rear Sprocket)
-NGK CR8E Spark Plugs .030 Gap
LIGHTING
-DDM Tuning 6000K Hi/Lo Motorcycle HID Kit
-Clear Alternatives Smoked Integrated Taillight
-ELFR-1 Flasher Relay
-Superbright LED Front Turn Signals
-Aztec8 41mm Headlight Mounts
-Replacement Headlight Housing
-Fully integrated HID wiring into the main Harness
BODY
-Targa Solo Seat Cowl
-Stripped/Painted Tins Matte Black
-Powdercoated Triple Clamps Gloss Black
-Powdercoated Headlight Trim Ring Gloss Black
-Powdercoated Frame Aussie’s Flat Anodized Red
-Powdercoated Wheels Aussie’s Flat Anodized Red
-Powdercoated Inner Brake Rotors Aussie’s Flat Anodized Red
-Powdercoated Rear Swingarm Matte Black
-Powdercoated Various Brackets Matte Black
-Powdercoated Lower Forks Matte Black
-Modified/Powdercoated Rear Subframe Matte Black
-Painted Rear Brake Caliper Matte Black
-Motrax Tank Pad
-SV Racing Parts Black Anodized Exhaust Hanger
-Billet Keyless Gas Cap
-99-02 Full Lock Set
-99-02 Black Chain Guard
-Corbin Seat
-OEM Frame Covers
-mrk66 (SVRider) Quick Release Tank Pin Set
-mrk66 (SVRider) Quick Release Panel/Tank Kit
-Nille (SVRider) Black Clutch Cover
-CNC Aluminum Swingarm Spools
SUSPENSION
-Kawasaki ZX6R 03-04 Rear Shock
-Racetech .95 wt Spring/Gold Valve Emulator Kit
-Motul Expert 15W Fork Oil 1 Quart
-SV Racing Parts Captive Front Wheel Spacer/Speedo Delete Kit
-Replacement Rear Wheel Bearings
-SV650S Upper Triple Clamp
-SV Racing Parts Front Nissin Brake Adapter Brackets/Hardware
-Gold 954 Nissin Front Brake Calipers/Galfer Brake Pads
CONTROLS
-Billet Gold Shorty Adjustable Levers
-SV Racing Parts Rear Sets
-Vandriver Rear Integrated Billet Brake Fluid Reservoir
-Yamaha R6 Throttle Tube (5SL-26240-01-00)
-Vortex 41mm 7* Clip-on Handlebars
-Driven D3 Gold Aluminum Grips
-SV650S SS Front Brake Lines
-Galfer SS Rear Brake Line
ELECTRICAL
-MDA123 8 Cell Li-Ion Battery
-Acewell 2853 Digital Gauge
-In-Line Brake Pressure Switch
-FH016 MOSFET Regulator/Rectifier
-D’Ecosse (SVRider) R/R Wiring
-Modified Stock Wiring Harness w/ New Fuel Circuit, Deleted all Unused Wires, Added New Connectors For Rear Brake Light & All Turn Signals, etc
ENGINE/PERFORMANCE
-K&N Desnorkeled Air Filter
-Delkevic Mini - 8” C/F Round Muffler
-OEM Radiator Cap
-K&N Oil Filter
-Heat Wrapped/Sealed Exhaust
-Painted Engine Matte Black
-SV Racing Parts 520 Chain Kit (47T Rear Sprocket)
-NGK CR8E Spark Plugs .030 Gap
gordonmenninger
Well-known member
Sorry personally I think you are absolutely nuts to get back on a bike after having a bad wreck and fracturing vertebrae in your back! That's insane! 2 wheels vs 4 wheels on the road just does not mix!
