Just recieved my aerius i today

[scodo68]

Alot smaller then they look online. but really nice looking black. i noticed on speaker has a lower volume then the other. If you put your ear to the panel
the sound comes out near the bottom but tapers off as you go up. Im hopeing
this is a cheap fix.

 

[Hocky]

Trying vacuuming the panels very thoroughly after leaving them unpowered for 12+ hours. If this doesn't help, the panel might be going bad - hopefully you got a good deal or the seller is honest and helps you out.

 

[scodo68]

I ask him if he had vacumed them and he did several monthes ago. He also was going to switch the panels to see if it was anything else but did not. I only paid $250 for the set.

 

[Hocky]

Well, at least the price was right. You will still be under market value after replacing the panels and have basically new speakers.

 

[scodo68]

I emailed ml about replacement panels but have not heard back yet. But i did try the vacume trick and it helped a little but not much im still missing the high's in one speaker.

 

[roberto]

I emailed ml about replacement panels but have not heard back yet. But i did try the vacume trick and it helped a little but not much im still missing the high's in one speaker.

Hola...before you change the panels, go to the tweak section and look for washing the panels... the speaker that shows how to wash the panel is different than yours, it is a Request model, but the procedure is the same. You might recover them back. It is important to use only water, do not use any detergent or soap, just plain water from the hose. Wash only the front not the rear part of the panel. Let them soak and wait 2 days before you play them. This is to make sure they are dry. Happy listening,
Roberto.

 

[scodo68]

The panels are spotless,they are really clean i dont know if washing with water will do anything for them.

 

[roberto]

The panels are spotless,they are really clean i dont know if washing with water will do anything for them.

You do not know that, until you try it, right?... the reports are always helpful, and believe me, it works!... this is the last thing to do to the panels... then the replacement is a must. The only cost for this tweak is time, not money... and the willing to do it... Happy listening,
Roberto.

 

[scodo68]

Well i thought i would take the bad panel out and swamp it out with the good one and see if maybe it was the crossover or something else. Well when i took the good panel out i noticed it was sealed all the way around.The bad panel is not sealed on the sides. Is that something that can be fixed or is it game over for that panel?

 

[scodo68]

anybody else have this problem?