I'm sorry but I couldn't find any info regarding this on the Aeon model.
I have bought a pair of used Aeons and unfortunately they seem to have been placed in a (Cigarette) smoked environment. Except for that they smell bad also the polyester film diaphragm seems to have some small black moisty dust particles on it. I also notice that this affect the sound a little bit in the upper end. I have done some measurements and they are a bit dull in the 5kHz-10kHz area (a dip about 5dB depeding on angle). Above/below that frequencies they seem to be fine. I also notice that the frequencies are uneven on the panel , I'm not sure if this is the way it should be? There is more treble on top of the speaker and more midrange below. I was under the impresseion that the freq between 450-20000 should be even from the whole panel?
My question is if there is anything I can try to do to correct this. Is there anyway to clean the panel? I have tried with a vacuum cleaner but it doesn't seem to help. I used a small ear top out of cotton and gently touched the diaphraghm and it seemed to remove the dust but is there any risk with this, can I destroy the speaker?
Can I use some kind of cleanser or water?
There are about 10.000 holes in one pair of speaker so it also is a bit time consuming butI'm willy to do the work if I get better sound. If possible I want to remove the front so it's easier to dlean the diaphragm, is this possible or should I prevent touching the diaphragm at all, will it be damaged if I touch it ie as above with the small cotton sticks?
If there is no way I can clean this, what can I do, can I buy a new diaprghm and replace it myself or do I need to go to a service center (any idea about the cost for such a change on a pair of Aeons?)
I am very thankful for any help you can give me. And except for the dull treable they sound fantastic. I have an imaging in my room like never before. If I can only get back the high end of the speaker again I'm satisfied.
I have bought a pair of used Aeons and unfortunately they seem to have been placed in a (Cigarette) smoked environment. Except for that they smell bad also the polyester film diaphragm seems to have some small black moisty dust particles on it. I also notice that this affect the sound a little bit in the upper end. I have done some measurements and they are a bit dull in the 5kHz-10kHz area (a dip about 5dB depeding on angle). Above/below that frequencies they seem to be fine. I also notice that the frequencies are uneven on the panel , I'm not sure if this is the way it should be? There is more treble on top of the speaker and more midrange below. I was under the impresseion that the freq between 450-20000 should be even from the whole panel?
My question is if there is anything I can try to do to correct this. Is there anyway to clean the panel? I have tried with a vacuum cleaner but it doesn't seem to help. I used a small ear top out of cotton and gently touched the diaphraghm and it seemed to remove the dust but is there any risk with this, can I destroy the speaker?
Can I use some kind of cleanser or water?
There are about 10.000 holes in one pair of speaker so it also is a bit time consuming butI'm willy to do the work if I get better sound. If possible I want to remove the front so it's easier to dlean the diaphragm, is this possible or should I prevent touching the diaphragm at all, will it be damaged if I touch it ie as above with the small cotton sticks?
If there is no way I can clean this, what can I do, can I buy a new diaprghm and replace it myself or do I need to go to a service center (any idea about the cost for such a change on a pair of Aeons?)
I am very thankful for any help you can give me. And except for the dull treable they sound fantastic. I have an imaging in my room like never before. If I can only get back the high end of the speaker again I'm satisfied.