Mark F

Hi Rossman1, Do you still have disassembly and/or cleaning instructions for the ML Logos? Any chance you could post them or email me...

Would be nice to assume 29 year old foam tape will release freely from the stator. If that happens, I owe you a beer and should...

Found another thread on the ML forum describing disassembly and repair of Sequel II panels with pix posted by Member Leethomas in 2008...

Do you have a source for adhesive copper tape? Pretty sure I'll roll the dice and move forward. In the worst case, I tear the film and...

Yep. Sequel II panels (from 1995) have a continuous charge coating. SL3 panels (from 1999) have coating islands. Am assuming the...

Hey Jazzman, Just found your webpage. Should have looked there first, lots of good information within. Will need to disassemble the...

Hi Jazzman, Thanks for all the guidance and narrative for ESL panel repair. Will remove my panels and inspect whether the front stator...

Current Sequel II panels are in use but 29 years old such that efficiency is lower then woofers. Have ordered a Crown 1002 amp to allow...

Hi Jazzman, Thanks for the quick and articulate reply. You mentioning the need for "build(ing) a jig to support the rear stator in...

Hi Mirolab, Did you ever find a home for your tired SL3 panels? I'm considering starting a science project to try and rebuild my...

Jazzman, you seem pretty knowledgeable about ESL panels and rebuilding them. Do you understand root cause of sound degradation in older...

Thanks for all the feedback and suggestions. A Sunfire Symphonic Reference 2x250 amp was purchased to drive the new-to-me SL3s and the...

Wow, you rebuilt a Theater panel? I've got an older Logos which never really got much use as it's not a tonal balance for my Sequel...

Hi Mirolab, Can you clarify whether washing with a garden hose and drying with compressed air removed all black residue visible in the...

Based on the presence of HCl, Sodium Bicarbonate and other ionics listed on the Simple Green SDS, rest assured it will fail any...