georgehifi
Active member
Hope you see this JonFo or other for their input.
I now Have a pair of Magnat MP-02 plasma tweeters, I would like to play around integrate them into the ML's
The Magnats from my tests operate from around 5khz>.
I would like to roll off the Monoliths top end without going active and looking at the circuit it seems to me that cap C3 is a bypass cap to lift the ML's top end some by bypassing the 2ohm resistor, can you say at what frequency it comes in, I'm hoping around 6khz. As this graph for a raw panel I think by JonFo shows and droop after 3khz. This could be a starting point for my fooling around.
Cheers George
I now Have a pair of Magnat MP-02 plasma tweeters, I would like to play around integrate them into the ML's
The Magnats from my tests operate from around 5khz>.
I would like to roll off the Monoliths top end without going active and looking at the circuit it seems to me that cap C3 is a bypass cap to lift the ML's top end some by bypassing the 2ohm resistor, can you say at what frequency it comes in, I'm hoping around 6khz. As this graph for a raw panel I think by JonFo shows and droop after 3khz. This could be a starting point for my fooling around.
Cheers George
Attachments
Last edited: