How I install a cls panel with a friend.

[Duke]

Having done this several times, the first panel always is done clumsily, then we are perfect on the second panel. Let me know if you do yours differently. I will keep this DropBox link open for a month or so if the video does not upload.
https://www.dropbox.com/scl/fi/t4fg...7421.mp4?rlkey=xecx0bsvwfeybjee8n6k92u6t&dl=0

 

[Robert D]

Wow, that's much easier than doing the Prodigy. Better design on the CLS.

 

[Leporello]

I've done it solo. Get it lined up on one side, then apply pressure with the knee. I almost think this was suggested by instructions that came with the panel. Mine are CLS II's, but I don't see any substantial difference. I did it with the frame not attached to the transformer box or stand, which may help.

I bought mine from a seller who supplied the frames and electronics boxes plus a set of unopened panels. I subsequently destroyed one panel by an act of stupidity I won't get into here. So I've had some experience.