Search results

Sounds like the power supply to me. So you're saying that you're running 120V 50 Hz to them as opposed to 120V 60 Hz? If I read that right I'd say it could be the culprit.

Well, I received the power supplies on Monday. Finally got around last night to tearing into both speakers and replacing the power power supplies. Sure enough, after getting everything reassembled and powering up the stereo, everything is working again! Summits are playing beautifully, lights...

Well guys, as a small update: Called this morning to order replacement power supplies for both speakers. Was prepared to shell out about $75 per as quoted by Dana, but I couldn't get ahold of him. Instead, talked to Melodie about my issues and provided her my serial numbers. To my very...

Gordon, Thanks for the reply. I thought the same thing initially. The speakers are each on their own outlet. I actually brought in a really long extension cord from the garage and plugged the speakers (and even the equipment in the end) into a different circuit. I checked all breakers and...

Guys, How likely is it that both power supplies would poop out at the same time while the speakers were unplugged? Just curious...

Well Hocky, you were right. Pleasantly surprised with the price. I talked to Dana and he says he's about 85% sure it's the power supplies. I'll order a pair from him in a couple of weeks and install. Really hoping that's the issue. If not, I'll be sending the back plates in to have them...

Definitely on my list of things to do today. Was just really hoping someone would have an "easy fix" for my problem. I don't even want to imagine how much new boards for the speakers are going to cost.

Alright. Well I just hooked them back up after an hour of down-time. ESL panels still aren't working. I got very close and listened and you can very, very faintly hear the mids/highs in the panels... but they're definitely not playing like they should. In addition, the left speaker seems to...

Hi guys and gals, Roughly two months and some change ago I auditioned my humble stereo setup - Rogue 99 Magnum Pre, Music Fidelity A3.5 Transport, Monarchy SE-160 Mono Blocks, Summit Mains, Analysis Plus Wiring - for a few friends. Everything played beautifully, and thereafter I unplugged...

Final Mods List: LIGHTING -DDM Tuning 6000K Hi/Lo Motorcycle HID Kit -Clear Alternatives Smoked Integrated Taillight -ELFR-1 Flasher Relay -Superbright LED Front Turn Signals -Aztec8 41mm Headlight Mounts -Replacement Headlight Housing -Fully integrated HID wiring into the main Harness BODY...

Finally a couple of pics of the SV along with my Daytona 675... And... a video of the completed project. http://www.youtube.com/watch?v=H7EuMZrkWCM

Front shot showing off the HID headlight. Also of note are the SV Racing Parts caliper adapters and upgraded front brakes. Left side shot, down low. Shot of the SV Racing Parts left hand side rear set. Nice piece! And from up and over in the back.

Alright guys, As of tonight, the project is COMPLETE! Received my Motrax tank pad, SV Racing Parts rear sets, K&N oil filter, and a few other random bits in the mail recently, and finally had a chance to get them all on tonight. Special thanks goes out to Blair at SV Racing Parts for taking...

Well guys and gals, I've been slacking a lot with this bike in the last couple months. I got my new Daytona 675 to replace the one I wrecked, and shifted a lot of effort into getting that one up to spec. The really sad part is that the only major purchase left to be made for this bike is the...

Life sounds amazing! You're having a lot more fun that I am right now. Haha.

Finished product. Sooooo close!!!! Other side Rear Front As of now, I need to order a tank pad along with Tech Spec grip pads for the tank, SV Racing Parts Rearsets, and a Galfer SS Rear Brake Line. I am trying to find a rivet tool so I can rivet the master link onto the chain. I am...

Both after matte black high temp brake paint and baking. Rear wheel with cush drive completely reassembled and new 520 47-tooth sprocket installed. New 520 15-tooth front sprocket installed.

You can see the magnet for the pickup mounted in the brake disc. Wiring harness installed, carbs installed, airbox put in, everything plumbed. I tried out the wiring to make sure everything worked. The wiring that D'Ecosse gave me for the fuel gauge works great, but the 10 ohm and 100 ohm...

And now... for a MEGA UPDATE!!! Here is the culmination of a couple days (Friday and today) of work! Basically done except for the rear sets and rear brake line I need to order! Pics: Little aluminum bracket I fashioned to hold the speedo sensor for the new Acewell gauge. Couple coats of...

Here's the new fuel gauge circuit. Several resistors are included in that wiring bundle. I left the ends exposed and with actual sockets in case I need to swap the 10 and 100 ohm connections on the relay. And here's the pile of crap I was left with afterward. Okay, on to the wiring I...