Gliding Dutchman
Well-known member
"I certainly hope that what I am to report here will be of benefit to any Martin Logan enthusiast" Dewald Visser
CLS Panel Repair - Breaking New Ground
I am being discouraged by everone I communicate with regarding DIY repair to ML panels. I got nothing to lose so I thought why not give it a try...
I carefully sliced through the 'front' double-sided tape that adheres the front stator to the panel assembly.
Spars have been sprayed from the front with Q20 as to loosen the adhesive.
Carefully the front stator have been pulled off - great care has been taken not to rip the mylar or bend the stator.
Naked Panel - dusty!
HT copper strip - nasty!
HT copper strip - oxidized
Spar - nothing but firm weather stripping
To be continued...
CLS Panel Repair - Breaking New Ground
I am being discouraged by everone I communicate with regarding DIY repair to ML panels. I got nothing to lose so I thought why not give it a try...
I carefully sliced through the 'front' double-sided tape that adheres the front stator to the panel assembly.
Spars have been sprayed from the front with Q20 as to loosen the adhesive.
Carefully the front stator have been pulled off - great care has been taken not to rip the mylar or bend the stator.
Naked Panel - dusty!
HT copper strip - nasty!
HT copper strip - oxidized
Spar - nothing but firm weather stripping
To be continued...