Can you guys tell me if you heard any differences in sound when you used a crossover to put anything below 80hz going to subwoofers so the ML panel is only receiving the signal above 80hz? Specifically, did your ML's sound way better this way or just a minimal difference?
I am running Odyssey's now with one depth sub. The plan is to either pick up another depth or if there is a significant difference with having no lows below 80hz going to the speakers either getting a pair of Vandersteen w2q's or JL audio, etc.
One other point. I plan an amp upgrade down the line. If I go the subs with the crossover , I could get the lower wattage 150 watt amp as compared to the 250 watt amp that I suspect would be required running full range. Both amps have the same sonic signature, except the 250 watt model cost quite a bit more. Looking forward to your observations and comments.
Thanks, Greg
I am running Odyssey's now with one depth sub. The plan is to either pick up another depth or if there is a significant difference with having no lows below 80hz going to the speakers either getting a pair of Vandersteen w2q's or JL audio, etc.
One other point. I plan an amp upgrade down the line. If I go the subs with the crossover , I could get the lower wattage 150 watt amp as compared to the 250 watt amp that I suspect would be required running full range. Both amps have the same sonic signature, except the 250 watt model cost quite a bit more. Looking forward to your observations and comments.
Thanks, Greg
Last edited: