sleepysurf
Well-known member
Unfortunately, one of my front Summit woofers has gone on the fritz... not working at all. This happened once before, but unplugging to force a "reset" fixed it. The LED light is still green, so I'm HOPING it's not an amplifier fault. I tried the unplug reset anyways, but that didn't work. I removed the bottom woofer to access the amp/crossover connections, but everything seems intact. Either the push-on connector at the woofer itself has come loose, or perhaps one of the amps is bad (despite the green LED).
It seems the ONLY way to check the front woofer connection is to remove the entire front stat panel, as there is an MDF divider which seals off the front woofer cabinet from the rear.
Just wondering if anybody has removed their Summit stat panel, and how easy it is to do. I tried to call ML today, but they are closed.
Craig, my local Summit owner/expert has written instructions from ML on how to do that, and I/we may just tackle this ourselves. I bought my Summits used, so they are out of warranty. I just don't want to do any more damage while trouble-shooting this issue.
I'm open to any other suggestions.
It seems the ONLY way to check the front woofer connection is to remove the entire front stat panel, as there is an MDF divider which seals off the front woofer cabinet from the rear.
Just wondering if anybody has removed their Summit stat panel, and how easy it is to do. I tried to call ML today, but they are closed.
Craig, my local Summit owner/expert has written instructions from ML on how to do that, and I/we may just tackle this ourselves. I bought my Summits used, so they are out of warranty. I just don't want to do any more damage while trouble-shooting this issue.
I'm open to any other suggestions.