Aerius i malfunction

MartinLogan Audio Owners Forum

Help Support MartinLogan Audio Owners Forum:

Damianace

New member
Joined
Dec 27, 2021
Messages
2
Reaction score
1
The panel on my speakers started to slip and then the panel itself stop making noise the low driver still drives what could be the issue? And how can I fix it or send it somewhere to get fixed I live in central Florida
 

Robert D

Well-known member
MLO Supporter
Joined
Jul 21, 2020
Messages
2,205
Reaction score
522
Location
Ohio
Usually what that means is that the panel slipped down and then pulled the wires that connect to the panel. When that happens it can sever the connection.
 

Damianace

New member
Joined
Dec 27, 2021
Messages
2
Reaction score
1
Yes I spoke to their tech-support and they sent me instructions to re-solder the black and blue cables

I really hope this works
 

Robert D

Well-known member
MLO Supporter
Joined
Jul 21, 2020
Messages
2,205
Reaction score
522
Location
Ohio
Yes I spoke to their tech-support and they sent me instructions to re-solder the black and blue cables

I really hope this works
You need to get what they call "stat stops". One goes on each speaker to stop the panels from sliding down. They are small clips. Mine have a single hole in them that one screw goes through to fasten it. I suspect there are clips for each model. Just talk to Martin Logan and tell them you need them. They gave mine to me for free.

If you don't get the clips and install them, the panels will slip down again.

I've got them on my Prodigy speakers.
 

Benedikt

Member
Joined
May 17, 2022
Messages
5
Reaction score
6
My aerius panel is also slipping, and in in the philllipines. Any advice on how i can fix this here? Thank you
 

Attachments

  • 752820DB-B7BF-483E-B815-9563A5B5F5C0.jpeg
    752820DB-B7BF-483E-B815-9563A5B5F5C0.jpeg
    519.6 KB · Views: 18
  • 3739C5A2-1F75-4470-9872-BFC8405E70E0.jpeg
    3739C5A2-1F75-4470-9872-BFC8405E70E0.jpeg
    834.4 KB · Views: 18

Robert D

Well-known member
MLO Supporter
Joined
Jul 21, 2020
Messages
2,205
Reaction score
522
Location
Ohio
Contact Martin Logan for parts they call "stat stops". Little metal brackets that attach to the bottom of the sides of the frame. They prevent the panel from sliding down again, as gravity tries to pull them down.

They sent me mine free, but I live in the US. They are small and shouldn't cost much to send.

Ask them for directions on how to do it for your model.
 

Benedikt

Member
Joined
May 17, 2022
Messages
5
Reaction score
6
Contact Martin Logan for parts they call "stat stops". Little metal brackets that attach to the bottom of the sides of the frame. They prevent the panel from sliding down again, as gravity tries to pull them down.

They sent me mine free, but I live in the US. They are small and shouldn't cost much to send.

Ask them for directions on how to do it for your model.
Thank you
 

Reverb

Administrator
Staff member
Administrator
Moderator
Joined
May 29, 2020
Messages
198
Reaction score
26
My aerius panel is also slipping, and in in the philllipines. Any advice on how i can fix this here? Thank you
Hey Benedikt, were you able to get support for your Aerius panel?
 

Reverb

Administrator
Staff member
Administrator
Moderator
Joined
May 29, 2020
Messages
198
Reaction score
26
Just reaching out to say hello, any updates on your ML?
 
Top