Recent content by DDzCLX

MartinLogan Audio Owners Forum

Help Support MartinLogan Audio Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    SOLD my CLX, to me again!

    I have modified CLX with a pair of Descent I c/w CLX filters to match the low frequency roll off. I'm very happy with my set up but am sure that a pair of BF212 would be even better. A friend has CLX and uses a pair of JL Audio F212 with his, very impressive. Meanwhile, enjoy the music
  2. D

    Greetings from the Great White North!

    Welcome. I currently power my CLX with a KSA 250, makes for a nice space heater on those cold evenings
  3. D

    Are the BalancedForce 212's out of production?

    I bought a pair of Descent i from DaVinci (Shawn) for my CLX. Recommended.
  4. D

    Still tweaking?

    a pair of Neoliths
  5. D

    ESL finer positioning & placement

    This pretty much describes my set up, 6 feet from the front wall at the centre of the panel " In an intimate setting, you'd probably be about 8 to 10ft away from the panels, with a good 5-6ft away from the front wall, and around 6-7ft apart with slight angle inwards." The speakers haven't...
  6. D

    Happy owner of CLSIIZ anc CLX ART

    I've seen this discussed many times but have yet to see anyone who has implemented an active cross over on the CLX. Personally I am using mono blocks most of the time (ARC Classic 150).
  7. D

    Happy owner of CLSIIZ anc CLX ART

    I'm not disagreeing with anything Roberto is saying about CLS, I've never owned them nor have I taken them apart. On the CLX, my comment was that it does indeed have a cross over. The switches reduce the output of the bass panels (add series resistance to the signal fed to the panels), they...
  8. D

    Happy owner of CLSIIZ anc CLX ART

    I'm referring to the CLX (not CLS). CLX has a cross-over with slope of 6dB per octave for the bass panel, there are also switches (not in the manual) which reduce bass panel output by 0,1 or 2 dB dependant upon which position(s). As I'm sure you are aware there is also an add on filter for the...
  9. D

    Happy owner of CLSIIZ anc CLX ART

    On the CLX, please clarify your comment. I have rebuilt the network and recreated the schematic, there is filtering that directs the signal to either the low or mid/high frequency panels. How is this not a cross over? Here is a link that has some interesting mods for the CLX including a...
  10. D

    Happy owner of CLSIIZ anc CLX ART

    The CLX have a x-over, not sure about the CLS.
  11. D

    Obsessive hobbies....

    Don't worry about the elitists, 'The Shark' is a real Porsche. These days I ponder the current trend towards SUVs, I understand the demand side but wonder if Porsche is loosing its heritage. I have even heard: Porsche is now an SUV company that also makes some sports cars. Ouch...
  12. D

    Anyone aware if Martin Logan planning to release new range to replace 11A, 13A, 15A

    I have a pair of Descent I with the add-on CLX low pass filter module that helps to integrate the subs with the low frequency roll off of the CLX, No complaints from me. The newer BF c/w room correction (PBK) and also the low pass filter module. You will be just fine.
  13. D

    Obsessive hobbies....

    I hear you, just purchased a Numeric shifter for my 911 (Black Friday deal).
  14. D

    Anyone aware if Martin Logan planning to release new range to replace 11A, 13A, 15A

    Buy some used CLX if your room is large enough and let someone else take the depreciation hit.
Back
Top