Dublin25
Well-known member
Does anyone have a diagram showing how to remove the vista panel? I removed the bottom bolts, but the panel is attached to the base at the top and I am not sure how to remove it - don't want to damage anything. Thanks!
Removing Vista panel
- Thread starter Dublin25
- Start date
Help Support MartinLogan Audio Owners Forum:
amey01
Well-known member
See my thread on Vista panel replacement.
http://www.martinloganowners.com/forum/showthread.php?t=6755&highlight=panels
Why are you wanting to do this? There are good instructions available from ML - speak to service department for a copy.
http://www.martinloganowners.com/forum/showthread.php?t=6755&highlight=panels
Why are you wanting to do this? There are good instructions available from ML - speak to service department for a copy.
Dublin25
Well-known member
Thanks for the info. I have a replacement woofer coming - I wanted to take it apart and have it ready for when I get it tomorrow.
amey01
Well-known member
If the replacement is coming from ML, it should have good instructions with it. ML are good like that.
Adam is right, about the instructions. There should be a set in the box with the woofer, but when I had to replace one of my woofers, Jim Power e-mailed me the instructions as well.
There are two bolts where the bar is on the panel near the top. They are recessed, so you have to look down behind the panel in the gap between the panel and woofer box. Just be careful with the wires.
Chuck
There are two bolts where the bar is on the panel near the top. They are recessed, so you have to look down behind the panel in the gap between the panel and woofer box. Just be careful with the wires.
Chuck
