Custom Search
+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 34

Thread: System #29 (Clarity)

  1. #1
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default System #29 (Clarity)

    Robert Bethune
    Rancho Palos Verdes, CA, USA
    Model: Clarity
    Purchased: 2004
    Mods: These are stock, why mess with excellence, especially as they are still under warranty.

    Electronics:

    Sources:

    Turntable System: Linn LP-12 (Origin Live "Advanced" PS w/ DC motor/Ittok w/Zu Cables "Xaus" tonearm cable/Benz "ACE" medium output/Cinemag (DIY) 3440a step-up transformer)

    Universal Player: Denon DVD-2910

    Audio Electronics:

    Pre-amp: TAD-150 by Tube Audio Design
    Amplifiers: TAD-1000 tube monoblocs; PS Audio 100C
    Tuner: NAD 4020A

    Video Electronics:

    Plasma Monitor: Pioneer PDP-4300 43"
    HDTV/DVR converter: Motorola DCT6412 III
    Universal Player: Denon DVD-2910
    VCR: None

    Subwoofer: Velodyne F-1000 servo Sub

    Cables:

    The System is wired throughout with:
    Audioquest KingCobra and DiamondBack Interconnects
    Video is with Zu Cables Megular Component Cables
    Speakers are connected with Audioquest Indigo in a shotgun configuration.
    Power is provided by Zu Cable's "Birth "power cords.

    Stuff:

    Includes Panamax 5100 power conditioner, VPI bricks, Herbie's Tube Dampers, Vibrapod cones and feet, and other miscellaneous goodies.
    Attached Images    
    Last edited by risabet; 10-17-2009 at 05:34 PM. Reason: New Pictures
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  2. #2
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default Tad-150

    The Pre-amp up close! Note the Herbie's IsoCup w/Lampblack balls
    Attached Images  
    Last edited by risabet; 10-17-2009 at 05:41 PM.
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  3. #3
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Smile Power Cords

    I've recently added power cords by Zu Cable. The "Birth" cords, purchased on E-Bay (one at a time), have yielded a deeper sound stage with quieter backgrounds, compared to the stock cords. I think that the depth increase is attributable to the quieter backgrounds allowing the music to expand out of a darker background. The extension at the bottom seems to have increased as have the delicacy and purity of the very top end. Next I'll be repalcing the captive cord on the amp with a pigtailed "Birth."
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  4. #4
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default Addition!

    I've added an Origin Live "Advanced" PS w/DC motor to the Linn to replace the Valhalla board. A great addition and so much less expensive than the Lingo. Cleans up some of the bass and midbass issues with the Linn w/o losing the ability to "play the tune."

    This unit works with many different TT and has received great reviews.
    Attached Images  
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  5. #5
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default Coming Additions!

    I've ordered a pair of tube monos to replace the PS Audio, should be here in 3 weeks. I can't wait! See the website TAD-1000
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  6. #6
    Jeff Aguilar
    Guest

    Default

    I know that you are going to like the TAD-1000's. I have had mine since Christmas and they are fantastic!! It really matches well with the TAD-150! Congratulations on the new purchase.

    Jeff Aguilar
    System #36

  7. #7
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Talking Analog Improvements!

    Just ordered a Benz "Ace" medium output (.8mv) to replace the Talisman. The OL upgrade has motivated me to continue working on the analog part of the system, though after hearing the $15,000 McIntosh digital separates, I need to spend some dough on digital too.

    Still waiting on the TAD's, Paul at Tube Audio Design is way busy , I expect them next week some time. Also expecting our second daughter about the same time, amps may have to wait in the boxes a while. Waaahhh
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  8. #8
    Senior Member jjqiv's Avatar
    Join Date
    Jan 2005
    Location
    Los Gatos, CA
    Posts
    355

    Default

    Quote Originally Posted by risabet
    Just ordered a Benz "Ace" medium output (.8mv) to replace the Talisman. The OL upgrade has motivated me to continue working on the analog part of the system, though after hearing the $15,000 McIntosh digital separates, I need to spend some dough on digital too.

    Still waiting on the TAD's, Paul at Tube Audio Design is way busy , I expect them next week some time. Also expecting our second daughter about the same time, amps may have to wait in the boxes a while. Waaahhh
    Congrats in advance for the new arrivals (i.e., baby and amps). Don't wait to unpack the amps. They could be very helpful for playing some sweet, soothing music to get the baby to sleep.

    On another note, if you are financially committed to the purchase of the Ace, I would strongly recommend ponying up a few more bucks for a Shelter 501. The Ace is a very good cart, but the 501 is in much higher league.

  9. #9
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default The ACE has Arrived!

    Quote Originally Posted by jjqiv
    Congrats in advance for the new arrivals (i.e., baby and amps). Don't wait to unpack the amps. They could be very helpful for playing some sweet, soothing music to get the baby to sleep.

    On another note, if you are financially committed to the purchase of the Ace, I would strongly recommend ponying up a few more bucks for a Shelter 501. The Ace is a very good cart, but the 501 is in much higher league.
    I seriously considered a Shelter, but the $450.00 cost of the Benz is a chunk less than the $800.00 cost of the Shelter.

    On a preliminary listen, the Benz is a smooth, slightly bright cartridge. I think the 40 hours break in will calm the brightness and give more weight to the bass. But generally I have high hopes that this will be the one for a while. I hate rolling cartridges. I'll write a review on AA in a month or two.
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  10. #10
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default Everything arrives!

    Wednesday 4/20 the amps arrived with the Panamax 5100 power conditioner from TAD. I set up the units on Thursday, switched it on and horrible hum. Isolated the hum to the cable which requires a video ground isolator. Nothing is ever is simple in this hobby.
    Attached Images  
    Last edited by risabet; 10-17-2009 at 04:35 PM.
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  11. #11
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default Ground Loops galore

    The hum was caused by some serious ground loops:

    1. Cable TV loop removed with a Jensen video ground isolator
    2. Loops between the amps, pre-amp, and CD player removed by floating
    the grounds on the amp and CD power cords.

    Grounded through the pre-amp only, the system is now dead quiet, even on the phono input, allowing the magic of the tubes to shine through.
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  12. #12
    Taz
    Guest

    Default

    Instead of floating the grounds which can be bad. Try a product called HumX by ebtech I had a bad loop hum and tried everything this thing rocks and it is cheap and does not go in the signal path.

  13. #13
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default The measure of the TAD-1000?

    The amps have about 40 hours on them and are beginning to sound more consistent. There are many variables to deal with with these amps, the biggest being the variable feedback or "focus" control. With the control at minimum the imaging is moderately diffuse, more like a live event than reproduced music. With the control at the maximum, the image is tightly focused, a little more forward. I am setting it right in the middle for now, which seems to give me the best of both worlds, good focus and the blended acoustic of the best halls. I'll continue to listen and report on the sound.

    Speaker cables are next. I'll need 1m prs.
    Attached Images  
    Last edited by risabet; 05-14-2005 at 04:05 PM.
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  14. #14
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default Break-in surprise!

    The speed with which break-in seems to finalize is quite astonishing. Literally within an hour or two of listening at around the fifty hour mark the sound of the amps has locked in. Bass is deep and tight, the sounstage is expansive and at the same time specific. Harmonic richness in spades. Nice!
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

  15. #15
    Senior Member risabet's Avatar
    Join Date
    Jan 2005
    Location
    SoCal
    Posts
    1,186

    Default Done for awhile!

    I've reached the point where I am deeply satisfied with the sound my system is producing. I will be laying off the upgrading, tube rolling doesn't count, and spending my money on music, both live and recorded (mainly vinyl), and on the baby, who is really cute.
    LP-12 w/CF SC & Armboard w/"motor flip" mod (Origin Live Advanced PS w/DC motor)/Ittok w/Zu Cable "Xaus" cable/Benz ACE medium/Cinemag 3440A SUT; TAD-150; TAD-1000 monos; M/L Clarity's; Denon DVD-2910 Uni. Player; TADAC tube DAC; Velodyne F-1000 Sub; Audioquest cables; Panamax 5100 power conditioner; Vibrapod feet and cones; System: http://www.martinloganowners.com/for...read.php?t=350

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts