Results 1 to 4 of 4

Thread: Newbie but with an (old?) problem

  1. #1
    Newbie chbpe's Avatar
    Join Date
    Jan 2018
    Location
    KY
    Posts
    2

    Default Newbie but with an (old?) problem

    I just joined because its Saturday and ML is not open. I am hoping for advise here.

    Bought a Motion Vision X from BB this time last year.

    Suddenly it just STOPPED working yesterday. Will not respond to the remote to go on. All obvious stuff (to me) was checked.

    Any thoughts?


    chbpe

  2. #2
    Super User roberto's Avatar
    Join Date
    Jan 2005
    Location
    San Jose, Costa Rica
    Posts
    2,910

    Default

    Hola. Unplug the AC cable and wait at least 1 minute. Then plug it again. This will reset the unit. If this does not work, check for the AC cable to be plugged to the back of the unit. Re-insert the cable to the socket at the Motion Vision, all the way in. If your unit still does not works, you must contact ML service department. They will guide you better to track your problem.
    CLX, Stage X and Motion 4, BF-210 sub, Summits in second system. Conrad Johnson Classic One Twenty SE amp, ET-7 Conrad Johnson pre, Exasound E-32 DAC with Teddy Pardo linear power supply, Shun Mook products, Nordost and DHLabs cables. Anthem AVM-60 audio and video processor. Anthem MCA-325 center and surround power amp. BPT Signature 3.5 Plus Balanced Line Power Conditioner.

  3. #3
    Newbie chbpe's Avatar
    Join Date
    Jan 2018
    Location
    KY
    Posts
    2

    Default

    64 views but only one response - AND IT WAS A GOOD ONE!

    Thanks Roberto - you nailed the solution for me. Disconnect power, wait 60 seconds, and voilą - it worked.

    MUCH appreciated !!! Now I have to find a ML sub to wirelessly match up to the sound bar.

  4. #4
    Super User roberto's Avatar
    Join Date
    Jan 2005
    Location
    San Jose, Costa Rica
    Posts
    2,910

    Default

    The Dynamo 700W is the one. A little box that kills giants! You can’t go wrong with it!

    I’m glad I could help!
    Happy listening!
    CLX, Stage X and Motion 4, BF-210 sub, Summits in second system. Conrad Johnson Classic One Twenty SE amp, ET-7 Conrad Johnson pre, Exasound E-32 DAC with Teddy Pardo linear power supply, Shun Mook products, Nordost and DHLabs cables. Anthem AVM-60 audio and video processor. Anthem MCA-325 center and surround power amp. BPT Signature 3.5 Plus Balanced Line Power Conditioner.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •