Topplate Descent i removable?

MartinLogan Audio Owners Forum

Help Support MartinLogan Audio Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Cobraatje

New member
Joined
Jun 3, 2017
Messages
3
Reaction score
0
Location
The Netherlands
Yesterday I became the owner of a Martin Logan Descent i.
Great sub and a looker too.

Only problem is the topplate is damaged during transport.
I searched for a while for the Descent i and would not like to sent it back.

I cannot find information if the topplate is removable or not.
Is the topplate removable and if yes how?
 
If you are referring to the black metal plate, just press down at the top of the logo and release. It will pop up. Press again and it will settle down again.

But if you are referring to the wooden top, then you must pull out each of the 3 baffles (it is held in place by a clip at each of the 4 corners). At each of the top corners, you will see a large screw head. Turn the screw about a quarter turn anti-clockwise till the arrow mark on the screw head is pointing precisely upwards. You can now lift the wooden top. Do the reverse to reinstall the top.
 
Last edited:
With a busy schedule and holiday season it took some time to have the top plate repaired.
But it's repaired: descent i .jpg
 

Latest posts

Back
Top