Discuss and chat about all things MartinLogan!
Loyal MartinLogan customers,
Recently we announced a decision to discontinue our service support for certain legacy MartinLogan products that are no longer in production.
Well…we messed up.
Today I’m pleased to announce, after much discussion, the following:
1) MartinLogan stands...
2101 Delaware St.
Lawrence, KS 66046
<hr> Hours of Operation
Monday - Friday
I went through the process of Cleaning my Martin Logan Quest Stators in the shower.
I wrote the process down and created a PDF for everyone.
Hope this helps those interested in doing the same.
This thread will cover the topic of how to accurately measure and setup a MartinLogan based system using modern room correction systems, such as Audyssey, found on many new processors and receivers.
The thread will primarily be about the measurement process, but it will also cover certain setup...
"What would be a good amp choice for my MartinLogan speakers"?
That is the most common question we hear on the site. The folks at ML hear it too.
Selecting the right amplifier is a HIGHLY personal decision. Before asking the question again, here are some things you should read first:
I'll make this a sticky so it'll be easy to find.
Links to Audiogon and Ebay auctions are only allowed in the Classified section because they get deleted after 30 days.
Starting a thread in the Main Discussion forum saying "Hey, go look at Audiogon.. there are CLX's over...
I know this topic has been discussed before. I am posting to share a few recent experiences and learn from those of others.
I have Summits in my main 7.1 setup which were purchased after craving MLs for a decade and a half, and extensive ongoing, auditioning. Love them, never get...
Has anyone used a Krell KAV-500 with a pair Monolith IIIs? Will this do a better job than a Rotel RMB 1095?
Hi what are the flat cables recommended for rear speakers that I can make invisible under a carpet? Or maybe run them around 1 side of the room? I would need 5 - 6m if I ran them straight under the carpet, but to run them around the room would be 9 - 10m.
I will have some martin logan rear,...
Dear ML members,
I have a pair of SL3 for 13 years now and the panels are sagging and the metal shims provided by ML can't really hold the panels in place. Since the adhesive of Velco is softening and no longing can hold the panels. I just wonder how other members are fixing this issue. ...
When I came home today I heard a weird low rumble in the house when I approached the subwoofer that low rumble turned into a loud roar. I quickly unplugged the whole system and powered it up again with the same result. Can anyone provide any advice as to what might be going on with the sub?
Just fired up the Descent i sub today and noted a (60 cycle?) hum. This is unchanged whether or not anything is hooked up and is unaffected by the volume control.
Have not been able to get to service and am at a loss. Any ideas out there?
In my current theater room I have:
2 motion 12s for fronts
2 motion 10s for sides
2 motion 10s for rears
1 motion c center
2 dynamo 500 subs.
This is all being powered with a onkyo 819 avr.
I was changing the trim color on my Aerius i's and didn't realize the stat panels could slide down. One slid down and now one of the three wires going to the stat panel pulled loose. It's the red wire that appears to be "sandwiched" between the panels. Can I simply re-solder the lead to the...
As previously mentioned, I want to upgrade my amp for use with my Theos. My Sony STR6400ES puts out 140 watts per ch into 8 ohms in multichannel mode; it actually drops to 130 into 4 ohms if I'm reading the manual properly! I thought a stable amp would approximately double its 8 ohm output at 4...
Hi, I have a pair of ML vista, Rotel 1560 and a grotto I sub woofer. My budget is about 1500-1700 can someone advised what to get to complete the 5.1 surround sound. I was looking at the ML fx for the rear but not sure on the center due to budget.. Any input will be greatly appreciated
We all know that audiophiles hate vibrations. We often go to great lengths to protect our gear from vibrations. But, when I rest my hand on the airframe of one of my Ethos, every time a bass is plucked or a drum is whacked the airframe vibrates like a tuning fork. This can't be...
I just bought an Audio Research tube amp and it says to connect the speakers in a different way if they are common ground so I was wondering if these are? I used to have a pair of Polk SDA 2.3's that were. Appreciated if anyone would know.
I have posted on the forums before about a Loud Thaw sound coming from my Sub (Dynamo 500) http://www.martinloganowners.com/forum/showthread.php?15070-Loud-Thwap-Sound-From-Movie I calibrated the system using Audessy and tweaked a few settings here and there. All of my movies were...
Quick intro before I start:
AVR: Denon 2313
Fronts: Motion 40's
Center: Motion 30
Sub: Dynamo 500
I recently had my Dynamo 500 sub go out on me after only 8 months of ownership. I worked with Martin Logan and received a new one about two weeks ago. I have been trying to...
I'm wondering if going from an emotiva xpa5 amp to a parasound halo a51 amp would make my system sound even better. What do you think? I have Martin logan spire's, stage center, fx2's and depth i. *I'm using a Marantz AV8801 processor with audioquest diamondback xlrs and rocket 33...
I started another thread because the other one as was pointed out was too general. I'd love to know why other people picked theirs and what speakers did you listen to and pass on for these? :rocker:
Hi, my Summits are used, but they have been in the box for a long time. Do they need to be re-broken in, or should they be fine.
I have a great Home Theatre, but my Quest speakers are letting me down.
The paint has gone soft, grey and sticky.
I have searched here, for solutions, but there was no consensus on the best path to take. Cover it, just wipe it clean, sand and repaint.
I can do the work...
My local Magnolia rep informed me that they are beginning to clear ML Depth and Descent I's at 35% off and Motif's at 50% off. You can visit their website for more info. Good luck finding piece in the right color, I barely got 3 motif's for surround in matching colors.
I have been positively itching for a tube amp, but I just can't afford an all tube system for daily use...
Specifically I was wondering if anyone has actually tried something like this, not whether it's possible or not (though, opinions are welcome of course).
Has anyone tried one of...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.