Discuss and chat about all things MartinLogan!
Loyal MartinLogan customers,
Recently we announced a decision to discontinue our service support for certain legacy MartinLogan products that are no longer in production.
Well…we messed up.
Today I’m pleased to announce, after much discussion, the following:
1) MartinLogan stands...
2101 Delaware St.
Lawrence, KS 66046
<hr> Hours of Operation
Monday - Friday
I went through the process of Cleaning my Martin Logan Quest Stators in the shower.
I wrote the process down and created a PDF for everyone.
Hope this helps those interested in doing the same.
This thread will cover the topic of how to accurately measure and setup a MartinLogan based system using modern room correction systems, such as Audyssey, found on many new processors and receivers.
The thread will primarily be about the measurement process, but it will also cover certain setup...
"What would be a good amp choice for my MartinLogan speakers"?
That is the most common question we hear on the site. The folks at ML hear it too.
Selecting the right amplifier is a HIGHLY personal decision. Before asking the question again, here are some things you should read first:
I'll make this a sticky so it'll be easy to find.
Links to Audiogon and Ebay auctions are only allowed in the Classified section because they get deleted after 30 days.
Starting a thread in the Main Discussion forum saying "Hey, go look at Audiogon.. there are CLX's over...
Is there anyone who can repair panels or replace them for less than $1800? That price seems absurd to me. Almost 100% certain the panels are the issue but if they aren't then that is an expensive experiment.
I just bought a couple of CLX speakers. I have two Velodyne dd-15 for when I am playing movies and SACD. However, I do not use the Velodynes in two channel mode. So my question is when playing in two Channel mode (vinyl and cd's) should I get some descent i's? Do the add a lot when playing jazz...
Hello all. Just registered because after hearing all sorts of opinions from all sorts of people I figured it best to get it from the horses mouth so to speak... ML owners.
I have a large bright room that I currently refer to as "the echo chamber". It is a great room with hardwood floors and a...
Hi folks, Anyone know if the metal grills of the Depth i sub are removable? The drivers are really dusty and need cleaning. Thks for your replies.
The Townshed Pre and Bel Canto power combo was extremely soft and made the panels disappear instantly. It was ideal for long listening. Very tube like sound. Soft and mushy.
The Dac used was electrocompaniet - then used that dac, which has a buil-in pre, with Electrocompaniet monos. Did not...
Anyone using BMC S1 with MLs?I may have missed an opportunity to get an S1 amp,but no one was able to reassure me about this before a contemplated purchase.The S1 puts outs out 200W at 8 and 350 W at 4.I was thinking of using it with CLSIIZ,which are a very difficult load,known amp eaters,dipping...
AR Ref 5 when combined with Krell EVO 302 or Levinson 523 gave a beautiful midrange with acoustics and vocals, thick, and I preferred it much more to when it teamed up with Ar Ref 75.
However, when there were a lot of drums, bass, distortion in the song, the bass from Krell and Levinson muddied...
Hi, what's the easiest way to clean panels? Can I use a vacuum?
I am wondering whether the Electromotion ESL power brick is universal.
This thread ascertained that the Stage's external power supply works with both US and European power.
Can anyone who has an Electromotion ESL brick handy, kindly check whether it says 100-240 V @ 50-60Hz.
So I managed to get swindled in to buying a damaged pair of Aeon I's over the weekend.
Long story short, I paid $1000 for a pair of Aeon I's that had ESL panels that were only putting out about 10% and 40% volume respectively. The guy must have been screwing with leveling or something because...
Looking for advice on a budget preamp (around £400 - used) to match up with my Sunfire 300x2 power amp + SL3's
I had been thinking about tubes to take the edge of the slightly clinical but wonderful Sunfire.
I would prefer a pre that will change the sound rather than be simply being a neutral...
i just noticed a sub thread which made me right this one.
I am just wondering if it s easier to blend/integrate sub(s) with either a ML speaker that has a passive woofer or one that has a active woofer (either manually or by room correction software), or does it not make any difference at all and...
I have Spire's, stage x center, fx2 surrounds and Depth i sub. My preamp is a Marantz AV8801. I'm trying to decide between the Parasound halo a51 and emotiva xpr5. What do you guys think? I'd appreciate the help and advice. I actually have both in my possession currently. I'm leaning towards the...
Hello to everyone, first post, i have a slight problem.
Martin Logan Aerius speakers, right hand speaker bass driver has stopped working. Electrostatic panel is ok and playing normally, other than the driver itself giving up the ghost anyone have any suggestions as to what the problem may be?
I have my speakers plugged into a mains conditioner, which means that the are "in stanby" good to go when i power up JRiver, will this do the speakers any damage long term?
I have read that ups's limits power amps because of there type of correction. So since the summits and depths have there own amps do you feel this is true? I need to put a ups on my system due to the amount of brown outs I have been getting. Thanks
My CLS'es (early CLS I model) have been sitting in my parents' attic for some years - I switched to "normal" loudspeakers for a while since I didn't want my toddlers to poke holes in the diaphragm with a pencil or sth. I now want to bring the CLS magic back to our living room, but do no longer have...
I've had a descent for a long time to supplement my Monolith III's. Been happy for long time. I use a digital crossover for my panel mid bass and for my Descent. I use balanced cables through out except for my interconnects to the sub. I was reading my manual for the Descent and was surprised that...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.