Discuss and chat about all things MartinLogan!
Hello everyone, I went through the process of Cleaning my Martin Logan Quest Stators in the shower. I wrote the process down and created a PDF for everyone. Hope this helps those interested in doing the same. Cheers
i have recently purchase a new PC and in the transfer i lost all my email accounts so if someone could give me Jim Power email address i would appericate it. thanks
Loyal MartinLogan customers, Recently we announced a decision to discontinue our service support for certain legacy MartinLogan products that are no longer in production. Well…we messed up. Today I’m pleased to announce, after much discussion, the following: 1) MartinLogan stands...
This thread will cover the topic of how to accurately measure and setup a MartinLogan based system using modern room correction systems, such as Audyssey, found on many new processors and receivers. The thread will primarily be about the measurement process, but it will also cover certain setup...
"What would be a good amp choice for my MartinLogan speakers"? That is the most common question we hear on the site. The folks at ML hear it too. Selecting the right amplifier is a HIGHLY personal decision. Before asking the question again, here are some things you should read first: ...
Hey everyone, I'll make this a sticky so it'll be easy to find. Links to Audiogon and Ebay auctions are only allowed in the Classified section because they get deleted after 30 days. Starting a thread in the Main Discussion forum saying "Hey, go look at Audiogon.. there are CLX's over...
Serial decoder
A couple days ago i setup my martin logan speakers, a 5.1 system consisting of: 2 ML Odyssey's for the front http://www.martinlogan.com/pdf/manuals/manual_odyssey.pdf 1 ML Theater I for the center http://www.martinlogan.com/pdf/manuals/manual_theater_i.pdf 2 ML Scenario's for the Rears...
Was thinking of customizing my ReQuests. Part of my plan is to paint the paper part of the woofer a gloss black. Right now it is the original dull black that looks like it faded to a dark grey. I doubt anything negative will come out of it but wanted to get some opinions.
Hi everyone, I'm about to try out a Rel R-328 subwoofer, and reading about how to connect it best they recommend the high level connection, however I've read that you should not do that if the speakers are "powered". I'm assuming that means the electromotions can't be set up this way since they...
I recently purchased a pair of Ascents s/h. I'm enjoying getting used to them, and have added a couple of tweaks so far: absorbent foam tiles on the sloping part immediately behind the panels, and the same in front of the crossovers inside the woofer enclosures. I've also given the panels a shower,...
Dear all, my system is very simple CD Player: CD 303T SACD Professional Version amp: Harman Kardon HK 990 integrated amplifier speaker: ML Vista The sound of this set is in the warm side that I love. HK 990 do a good job in term of power. Any how I still wonder if there is any int amp...
Seeing as they are new, I can't really make any calls on sound but they seem to equal the Vistas I had last with more highs (which I had hoped for). I don't notice as wide a soundstage but I'm pretty confident they will open up once they get broken in. I did post my MF A300 up on a few sites...
Hello, At the moment I'm thinking to replace the Vantage standard power cables. Concerning yours experience what do you thing about this: - Black Rhodium Fusion Mains Cable Any one try silver power cables, results? Positive/Negative things Thank you in advance
Hi All, I'm wondering if anyone has tried using Dupont Elvamide to restore the conductivity of their panels. I found it on ebay and it says it works perfectly but I've never heard of anyone doing this. If anyone knows where a tutorial is that would be great! Thanks!
Thinking of purchasing this home. One photo was taken in the living room and the other from inside the kitchen. The only wall separating the 2 rooms is that wall containing the fireplace and TV. I would place 1 Request on each side of that wall structure containing the fireplace (both facing in...
Hi guys!, Currently using a motion 8 with my odyssey. Have a chance to get a used, with cosmetic scars, but still functional Logos... I understand it is discontinued and not supported by ML, saw the thread to change it's panel with another non logos one... Today I hook it up, and sounds...
Got a humming sound from my right front Vantage that started about a week ago. Have been running them for about 6months at the same spot without any changes. What should be on my to-do-list now?
I was browsing at Best Buy Magnolia this weekend and heard a Motion Vision soundbar and dynamo sub. Ended up buying both for my bedroom (the 3rd ML system in my house). I like the way they sound but the remote was dead out of the box. I replaced the battery but it still didn't work. It isn't a...
I'm thinking about upgrading my system and wanted to find out other people's opinions. I'd love to simplify my system a bit and narrow down the number of components, but I don't want to sacrifice too much in doing so. We are doing more 2 channel music listening than home theater so I was thinking...
Well guys, I stepped up and got the Mcintosh MC303 to power my Ethos and StageX and a Mcintosh MC205 to power my rears (4 Motion 15's) and a Mcintosh MX151 as my pre pro with AudioQuest Niagara XLR cables and AudioQuest Diamond HDMI cables and AudioQuest Rocket 88 speaker cables. I hope it sounds...
MLO, I was just about to buy the perfect bass kit but saw that the description says "for 1500x". ML site doesn't specify. Can someone clarify weather or not this can be used on the Dynamo 700W? Thanks again
Can you use summit x spikes on the summits? Is it necessary to buy them to achieve the rake agle you want? Any other suggestions on what I could use?
Anybody know what happened to Audiogon? I clicked on my link to check out the "new today", and it's not there. http://www.martinloganowners.com/forum/showthread.php?14619-System-461-(Theos)
Any thoughts on a Sunfire 300 x2 (non signature) amp to drive a pair of SL3's ? I have read some good and not so good stuff about this amp and that it is very tolerant of the low impedance that the ES panels can present. I am using a sub <80hz so it doesn't need to work too hard at the bottom...
Hi, I'm new to the ML world. I just picked up a pair of used EM ESL over the weekend and trying to built a HT system around them. Is there any design advantage to use FX2 speakers vs motion 12's? The motion 12's are a little cheaper and I would assume have more bass. Thanks in advance!
I just received my ReQuest replacement panels today. They do NOT have clear spars. I thought all replacement panels now come in clear. A few years back I replaced my Sequel III panels and they came with clear spars. And this model is older than the ReQuest. I was really hoping for the...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
